ADP8863

Rev. 0 | Page 37 of 48

Bit Name

Bit No.

Description

SC4_EN

3

This enable acts upon LED4.

1 = SC4 is turned on.

0 = SC4 is turned off.

SC3_EN

2

This enable acts upon LED3.

1 = SC3 is turned on.

0 = SC3 is turned off.

SC2_EN

1

This enable acts upon LED2.

1 = SC2 is turned on.

0 = SC2 is turned off.

SC1_EN

0

This enable acts upon LED1.

1 = SC1 is turned on.

0 = SC1 is turned off.

Independent Sink Current Time (ISCT1)—Register 0x11

Table 44. ISCT1 Bit Map

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

SCON

SC7OFF

SC6OFF

SC5OFF

Table 45. Bit Descriptions for the ISCT1 Register

Bit Name

Bit No.

Description1, 2

SCON

[7:6]

SC on time. If the SCxOFF time is not disabled and the independent current sink is enabled (Register 0x10), the LED(s)

remains on for the time selected (per the following list) and then turns off.

00 = 0.2 sec

01 = 0.6 sec

10 = 0.8 sec

11 = 1.2 sec

SC7OFF

[5:4]

SC7 off time. When the SC off time is disabled, the ISC remains on while enabled. When the SC off time is set to any

other value, the ISC turns off for the off time (per the following listed times) and then turns on according to the SCON

setting.

00 = off time disabled

01 = 0.6 sec

10 = 1.2 sec

11 = 1.8 sec

SC6OFF

[3:2]

SC6 off time. When the SC off time is disabled, the ISC remains on while enabled. When the SC off time is set to any

other value, the ISC turns off for the off time (per the following listed times) and then turns on according to the SCON

setting.

00 = off time disabled

01 = 0.6 sec

10 = 1.2 sec

11 = 1.8 sec

SC5OFF

[1:0]

SC5 off time. When the SC off time is disabled, the ISC remains on while enabled. When the SC off time is set to any

other value, the ISC turns off for the off time (per the following listed times) and then turns on according to the SCON

setting.

00 = off time disabled

01 = 0.6 sec

10 = 1.2 sec

11 = 1.8 sec

cycle to cause a preprogrammed sequence to start simultaneously.