Sheet No.: D1-A00301EN

6

PD100MF0MPx

■ Presence of ODCs (RoHS Compliance)

This product shall not contain the following materials, and they are not used in the production process for this

product:

• Regulated substances: CFCs, Halon, Carbon tetrachloride, 1,1,1-Trichloroethane (Methylchloroform). Specific

brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.

This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).

• Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl

ethers (PBDE).

• Content information about the six substances specified in “Management Methods for Control of Pollution

Caused by Electronic Information Products Regulation” (Chinese:

)

NOTE:

✓ indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement

as described in SJ/T 11363-2006 standard.

■ Taping Specifications

1.

Tape structure and dimensions conforms to those shown in Fig. 5 to Fig. 10.

2.

Product insertion will have the cathode to the hole side of the tape.

3.

Cover tape peel-separation force: F = 0.2 to 1.0 N (where

θ 160° to 180°)

4.

Quantity per reel = 2000 pcs. (PD100MF0MP) or 1500 pcs. (PD100MF0MP1)

5.

Product mass: 0.01 g (approx.)

6.

Packaging:

a.

Reels are sealed inside an aluminum bag, along with a humidity indicator card.

b.

Bags are labeled and securely packed.

Category

Toxic and Hazdardous Substances

Lead (Pb)

mercury (Hg)

Cadmium (Cd)

Hexavalent

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

Photo Diode

✓

✓

✓

✓✓✓