B40-1F30-FKB datasheet(2/20 Pages) MAGNETROL

2 / 20 page

Read this Manual Before Installing

This manual provides information on the B40 Sealed

External Cage Liquid Level Switch. It is important that

all instructions are read carefully and followed in

sequence. Detailed instructions are included in the

Installation section of this manual.

Conventions Used in this Manual

Certain conventions are used in this manual to convey

specific types of information. General technical material,

support data, and safety information are presented in

narrative form. The following styles are used for notes,

cautions, and warnings.

Notes

Notes contain information that augments or clarifies

an operating step. Notes do not normally contain

actions. They follow the procedural steps to which

they refer.

Cautions

Cautions alert the technician to special conditions that

could injure personnel, damage equipment, or reduce

a component’s mechanical integrity. Cautions are also

used to alert the technician to unsafe practices or the

need for special protective equipment or specific

materials. In this manual, a caution box indicates a

potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

Warnings

Warnings identify potentially dangerous situations or

serious hazards. In this manual, a warning indicates an

imminently hazardous situation which, if not avoided,

could result in serious injury or death.

WARNING! Explosion hazard. Do not connect or

disconnect equipment unless power has been switched off

or the area is known to be non-hazardous.

Low Voltage Directive

For use in Category II installations. If equipment is used

in a manner not specified by manufacturer, protection

provided by equipment may be impaired.

Notice of Copyright and Limitations

Magnetrol reserves the right to make changes to the

product described in this manual at any time without

notice. Magnetrol makes no warranty with respect to the

accuracy of the information in this manual.

Warranty

All Magnetrol mechanical level and flow controls are war-

ranted free of defects in materials or workmanship for five

full years from the date of original factory shipment.

If returned within the warranty period; and, upon factory

inspection of the control, the cause of the claim is

determined to be covered under the warranty; then,

Magnetrol will repair or replace the control at no cost to

the purchaser (or owner) other than transportation.

Magnetrol shall not be liable for misapplication, labor

claims, direct or consequential damage or expense arising

from the installation or use of equipment. There are no

other

warranties

expressed

implied,

except

special written warranties covering some Magnetrol prod-

ucts.

Quality Assurance

The quality assurance system in place at Magnetrol guar-

antees the highest level of quality throughout the compa-

ny.

Magnetrol

committed

providing

full customer satisfaction both in quality products and

quality service.

Magnetrol’s quality assurance system is

registered to ISO 9001 affirming its

commitment to known international

quality standards providing the strongest

assurance of product/service quality

available.

B40-1F30-FKB 数据表(PDF) 2 Page - Magnetrol International, Inc.

B40-1F30-FKB 数据表(HTML) 2 Page - Magnetrol International, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

数据表下载