DL4 datasheet(12/76 Pages) ITT

12 / 76 page

Dimensions are shown in mm (inch)

Dimensions subject to change

ZIF Connectors

DL/DLM/DLD

How to Identify the Ideal DL Product for Your Application

Q. What type of actuation does the application require?

Q. Does the application require plastic housing?

Q. Does the application require metal housing?

Q. Does this application involve low currents?

Q. Does this application involve standard currents of more than

100 milliamps?

Q. Does this application involve higher than 5 amps?

Q. What type of contact is required for this application?

Q. Does the application require crimp contacts?

Q. Does the application require crimp tooling, with low or high

volume?

Q. Is an actuating handle needed?

Q. Does the application require fool-proof mating?

Q. How do I protect the wiring / cabling?

Q. When the DL5-260 series application requires EMI / RFI

shielding?

Q. Does the customer need to protect the contacts when

connector is not mated?

A. Manual (turn handle cam) – DL / DLM series.

Blind mating (self cam) – DLD drawer series.

A. DL / DLD series.

A. DLM series (for EMI / RFI shielding).

DL4 series.

A. For 100 milliamps or less use 50

µ inch gold contacts (Flat contacts

on Receptacle, and Bump contacts on Plug), see pages 52-53.

A. For more than 100 milliamps, use 20

µ inch gold contacts

(Hermaphroditic Bump contact), see pages 52-53.

A. For higher than 5 amps use Buss contacts, see page 51.

A. Select the appropriate part number for the Plug and Receptacle

based on the number and type of contacts needed for this

application, see pages 12-13.

A. Order appropriate crimp contacts for the wire size used in this

application, see pages 50-53.

µ inch Gold (low current to 5 A applications) – Most

Versatile

µ inch Gold (standard application)

Buss contacts (high amps-greater than 5 A)

A. For low volume of crimps:

Order loose contacts and order the appropriate hand tool,

see page 55.

For high volume of crimps (50,000 per year or more):

Order reeled contacts, see page 53, and contact Cannon’s Customer-

Use-Tooling to lease an automatic crimp machine, see page 59.

A. Actuating handles are ordered separately (except DL4 Series),

see page 47.

A. Order the polarizing posts to protect from erroneous mating,

see page 48.

A. Two Options:

Plastic Junction Shell with optional second entry cable clamp

kit, see page 46.

Metal Backshell available, see pages 44-45.

A. Order the EMI / RFI metal shielding shells or utilize the new DLM5

series without shield shell, see page 49.

A. Order the appropriate protective cover, see page 47.

DL4 数据表(PDF) 12 Page - ITT Industries

DL4 数据表(HTML) 12 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

数据表下载