www.ti.com

Evaluating Performance with the ADCPro Software

In addition, the Manual Control button (shown in Figure 20) can be used to enable or disable auto scan

modes 1 and 2. Auto 1 Mode allows the selection of any number of channels from the channel selection

list. Auto 2 Mode allows the selection of the highest channel to convert. All channels below this will be

converted once this selection is made by pressing the 'Accept Selection' button.

Figure 20. Manual Channel Control

21

SLAU262C

– January 2009 – Revised May 2011

ADS79xxEVM and ADS79xxEVM-PDK

Submit Documentation Feedback

Copyright

© 2009–2011, Texas Instruments Incorporated