Schematic and Bill of Materials

www.ti.com

8.1.6

Collecting Data

Once the user has configured the ADS7953 for the test scenario, press the ADCPro Acquire button to

start the collection of the number of datapoints specified in the Test plug-in Block Size control. The

ADS7953EVM-PDK plug-in disables all the front panel controls while acquiring, and displays a progress

bar as shown in Figure 25.

Figure 25. Progress Bar While Collecting Data

For more information on testing analog-to-digital converters in general and using ADCPro and Test

plug-ins, refer to the ADCPro Analog-to-Digital Converter Evalutation Software Users Guide.

8.2

Troubleshooting

If ADCPro stops responding while the ADS7953EVM-PDK is connected, try unplugging the power supply

from the PDK. Unload and reload the plug-in before reapplying power to the PDK.

9

Schematic and Bill of Materials

Complete schematics for the ADS7953EVM are appended to this user guide. The bill of materials is

provided in Table 7. Gerber files are available on request. Please e-mail support@ti.com and ask for

details on how to receive the files.

26

ADS79xxEVM and ADS79xxEVM-PDK

SLAU262C

– January 2009 – Revised May 2011

Submit Documentation Feedback

Copyright

© 2009–2011, Texas Instruments Incorporated