ADS7953EVM-PDK Kit Operation

www.ti.com

This procedure should complete the installation of the NI-VISA drivers. Verify the proper installation by

opening the Device Manager and locating as shown in Figure 10.

Figure 10. NI-VISA Driver Verification Using Device Manager

Once ADCPro is installed, install the ADS7953EVM-PDK software to allow ADCPro to recognize the

evaluation board.

7.4.2

USBStyx Driver Installation

Start the software by selecting ADCPro from the Windows Start menu. The screen in Figure 11 appears.

Figure 11. ADCPro Software Start-up Display Window

1. Select ADS7953EVM from the EVM drop-down menu. The ADS7953EVM-PDK plugin appears in the

left pane, as shown in Figure 12.

14

ADS79xxEVM and ADS79xxEVM-PDK

SLAU262C

– January 2009 – Revised May 2011

Submit Documentation Feedback

Copyright

© 2009–2011, Texas Instruments Incorporated