| 数据搜索系统,热门电子元器件搜索 |
|
WM8741GEDS/V 数据表(PDF) 38 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8741GEDS/V 数据表(HTML) 38 Page - Wolfson Microelectronics plc |
|
38 / 64 page ![]() WM8741 Production Data w PD, Rev 4.2, October 2009 38 It is recommended that the device is muted before the filter response is changed to prevent noise as the filters are reset from appearing on the outputs. Full details of these filters are described in Table 68 and Figure 60 to Figure 67. DSD DIRECT DIGITAL FILTERS The DSD Direct filters have been designed to provide the minimal of processing to the data with no decimation, re-quantisation or noise-shaping, in order to preserve the signal integrity as much as possible. As a result the filters have a wide bandwidth and a very gradual attenuation. It is recommended that whichever DSD Direct filter is chosen it is augmented by analogue post-DAC filtering in order to adhere to the Scarlet-Book SACD standard. There are a total of four DSD Direct filter responses available, controlled by two register bits as described in Table 41 below: REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R32 Additional Control 1 20h 0 DSD_NO_ NOTCH 0 DSD Direct 8fs Notch Filter 0: Enable 8fs notch filter 1: Disable 8fs notch filter 1 DSD_ LEVEL 1 DSD Direct Filter Gain 0: High gain 1: Low gain Table 41 DSD Direct Digital Filter Selection DSD MUTE CONTROL In DSD Direct mode, an analogue mute can be applied at the output of the DAC. This is controlled by register bit AMUTE. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R4 Volume Control 04h 7 AMUTE 0 DSD Direct mute control: 0 = mute off 1 = mute on Table 42 DSD Analogue Mute Control POWER SAVING STANDBY CONTROL Setting the PWDN register bit immediately connects all outputs to VMID and resets the digital sections of the DAC system including the DLL, the audio interface and the DSP. Input data samples are not preserved, but all control register settings are maintained. When PWDN is cleared the WM8741 will repeat its power-on initialisation sequence. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R5 Format Control 05h 7 PWDN 0 Power Down Mode Select: 0 = Normal Mode 1 = Power Down Mode Table 43 Powerdown Control |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |