| 数据搜索系统,热门电子元器件搜索 |
|
RT8205CGQW 数据表(PDF) 12 Page - Richtek Technology Corporation |
|
|
|||||||||||||||||||||||||||||
RT8205CGQW 数据表(HTML) 12 Page - Richtek Technology Corporation |
|
12 / 28 page ![]() RT8205A/B/C 12 DS8205A/B/C-06 July 2012 www.richtek.com © Copyright 2012 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation. Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may affect device reliability. Note 2. θJA is measured at TA = 25°C on a high effective thermal conductivity four-layer test board per JEDEC 51-7. θJC is measured at the exposed pad of the package. Note 3. Devices are ESD sensitive. Handling precaution is recommended. Note 4. The device is not guaranteed to function outside its operating conditions. Note 5. PVIN + PVREG5 Parameter Symbol Test Conditions Min Typ Max Unit VOUT Discharge VOUTx Discharge Current IDISx ENTRIPx = GND, VOUTx = 0.5V 10 60 -- mA Logic Input Low Level (Internal Fixed VOUTx) -- -- 0.2 V FB1/FB2 Input Voltage High Level (Internal Fixed VOUTx) 4.5 -- -- V Low Level (PWM Mode) -- -- 0.8 V REF Level (DEM Mode) 1.8 -- 2.3 V SKIPSEL Input Voltage High Level (Ultrasonic Mode) 2.5 -- -- V ENTRIPx Input Voltage SMPS On Level 0.35 0.4 0.45 V Logic-High VIH 1 -- -- EN Threshold Voltage Logic-Low VIL -- -- 0.4 V VOUT1/VOUT2 = 200kHz/250kHz -- -- 0.8 VOUT1/VOUT2 = 300kHz/375kHz 1.8 -- 2.3 TONSEL Setting Voltage VOUT1/VOUT2 = 400kHz/500kHz 2.5 -- -- V EN = 0V or 25V −1 -- 3 TONSEL, SKIPSEL = 0V or 5V −1 -- 1 Input Leakage Current FBx = SECFB = 0V or 5V −1 -- 1 μA Internal BOOT Switch Internal Boost Charging Switch On-Resistance VREG5 to BOOTx -- 20 -- Ω Power MOSFET Drivers UGATEx Driver Sink/Source Current UGATEx Forced to 2V -- 2 -- A LGATEx Driver Source Current LGATEx Forced to 2V -- 1.7 -- A LGATEx Driver Sink Current LGATEx Forced to 2V -- 3.3 -- A UGATEx On-Resistance BOOTx to PHASEx Forced to 5V -- 1.5 4 Ω LGATEx, High State -- 2.2 5 LGATEx On-Resistance LGATEx, Low State -- 0.6 1.5 Ω LGATEx Rising -- 30 -- Dead Time UGATEx Rising -- 40 -- ns |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |