REV. E

AD9432

–4–

ABSOLUTE MAXIMUM RATINGS

*

Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . 20 mA

Operating Temperature . . . . . . . . . . . . . . . . –55

°C to +125°C

Storage Temperature . . . . . . . . . . . . . . . . . . –65

°C to +150°C

Maximum Junction Temperature . . . . . . . . . . . . . . . . 150

°C

Maximum Case Temperature . . . . . . . . . . . . . . . . . . . 150

°C

*Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions outside of those indicated in the operation

sections of this specification is not implied. Exposure to absolute maximum

ratings for extended periods may affect device reliability.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the AD9432 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

PowerQuad is a registered trademark of AMkor Technology, Inc.

THERMAL CHARACTERISTICS

52-Lead Plastic LQFP (ST-52)

°C/W, No Airflow

52-lead PowerQuad

°C/W, Soldered Exposed Heat Sink, No Airflow

°C/W, Unsoldered Exposed Heat Sink, No Airflow

°C/W, Bottom of package (Exposed Heat Sink)

Simulated Typical performance for 4-layer JEDEC board,

horizontal orientation.

ORDERING GUIDE

Temperature

Package

Package

Model

Ranges

Descriptions

Option

AD9432BSQ

–40

°C to +85°C 52-Lead Thermally

SQ-52

-80, -105

Enhanced Plastic

Quad Flatpack

AD9432BST

–40

°C to +85°C 52-Lead Plastic Quad ST-52

-80, -105

Flatpack (LQFP)

AD9432/PCB 25

°C

Evaluation Board

EXPLANATION OF TEST LEVELS

Test Level

I

100% production tested.

II

100% production tested at 25

°C and sample tested at

specified temperatures.

III Sample tested only.

IV Parameter is guaranteed by design and characterization

testing.

V

Parameter is a typical value only.

VI 100% production tested at 25

°C; guaranteed by design and

characterization testing for industrial temperature range.