| 数据搜索系统,热门电子元器件搜索 |
|
INTEDG 数据表(PDF) 157 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
INTEDG 数据表(HTML) 157 Page - Microchip Technology |
|
157 / 478 page ![]() 2010-2012 Microchip Technology Inc. DS41414D-page 157 PIC16(L)F1946/47 14.0 FIXED VOLTAGE REFERENCE (FVR) The Fixed Voltage Reference, or FVR, is a stable voltage reference, independent of VDD, with 1.024V, 2.048V or 4.096V selectable output levels. The output of the FVR can be configured to supply a reference voltage to the following: • ADC input channel • ADC positive reference • Comparator positive input • Comparator negative input • Digital-to-Analog Converter (DAC) • Capacitive Sensing (CPS) module • LCD bias generator The FVR can be enabled by setting the FVREN bit of the FVRCON register. 14.1 Independent Gain Amplifiers The output of the FVR supplied to the ADC, Comparators, DAC and CPS module is routed through two independent programmable gain amplifiers. Each amplifier can be configured to amplify the reference voltage by 1x, 2x or 4x, to produce the three possible voltage levels. The ADFVR<1:0> bits of the FVRCON register are used to enable and configure the gain amplifier settings for the reference supplied to the ADC module. Refer- ence Section 16.0 “Analog-to-Digital Converter (ADC) Module” for additional information. The CDAFVR<1:0> bits of the FVRCON register are used to enable and configure the gain amplifier settings for the reference supplied to the Comparators, DAC and CPS module. Reference Section 17.0 “Digital-to- Analog Converter (DAC) Module”, Section 18.0 “Comparator Module” and Section 26.0 “Capacitive Sensing (CPS) Module” for additional information. 14.2 FVR Stabilization Period When the Fixed Voltage Reference module is enabled, it requires time for the reference and amplifier circuits to stabilize. Once the circuits stabilize and are ready for use, the FVRRDY bit of the FVRCON register will be set. See Section 30.0 “Electrical Specifications” for the minimum delay requirement. FIGURE 14-1: VOLTAGE REFERENCE BLOCK DIAGRAM ADFVR<1:0> CDAFVR<1:0> X 1 X 2 X 4 X 1 X 2 X 4 2 2 FVR BUFFER1 (To ADC Module) FVR BUFFER2 (To Comparators, DAC, CPS) FVR VREF (To LCD Bias Generator) + _ FVREN FVRRDY 1.024V Fixed Reference Any peripheral requiring the Fixed Reference (See Table 14-1) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |