STLBC01 datasheet(21/40 Pages) STMICROELECTRONICS

21 / 40 page

DocID022984 Rev 2

21/40

STLBC01

Host controller interface (HCI)

The STBLC01 includes a host controller interface as defined in [

2], volume 2; part E.

Table 12 summarizes the command, Table 13 the data format and Table 14 the event

format. A more detailed description of commands and events as well as all HCI related

information can be found in [

2].

Table 12. HCI command format

Byte #

Parameter

Size

Description

1Packet_ID

Packet ID: packet Identifier

– For HCI Command Packet_ID = 0x01

2-3

OpCode

OpCode is a unique identification of the command. It

includes

– OpCode Group Field (OGF) of 6 bits. Code 0x3F is

reserved for Vendor command

– OpCode Command Field (OCF) of 10 bits

Parameter_Total_Le

ngth

Lengths of all the parameters contained in the given

command packet (N.B.: total length of parameters, not

number of parameters)

Parameter_0

Each command has a specific number of parameters

associated with it. These parameters and the size of each of

the parameters are defined for each command. Each

parameter is an integer number of octets in size

...

Parameter_N

Table 13. HCI ACL data format

Byte #

Parameter

Size

Description

1Packet_ID

Packet ID: Packet Identifier

– For HCI Data Packet_ID = 0x02

2-3

Handle

PB flag

BC flag

Connection_Handle (12 bit) to be used for transmitting data

packet or segment over primary controller. Range: 0x000-

0xEFF (0xF00-0xFFF reserved for future use)

Packet_Boundary_Flag (bit 4 and bit 5 of the second octet)

Broadcast_Flag (bit 6 and bit 7 of the second octet)

Data_Total_Length

Length of data measured in octets.

Data

ACL data (L2CAP PDU)

STLBC01 数据表(PDF) 21 Page - STMicroelectronics

STLBC01 数据表(HTML) 21 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

数据表下载