数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

STLBC01 数据表(PDF) 22 Page - STMicroelectronics

部件名 STLBC01
功能描述  Bluetooth low energy controller
PDF  40 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  STMICROELECTRONICS [STMicroelectronics]
网页  http://www.st.com
标志 STMICROELECTRONICS - STMicroelectronics

STLBC01 数据表(HTML) 22 Page - STMicroelectronics

Back Button STLBC01 Datasheet HTML 18Page - STMicroelectronics STLBC01 Datasheet HTML 19Page - STMicroelectronics STLBC01 Datasheet HTML 20Page - STMicroelectronics STLBC01 Datasheet HTML 21Page - STMicroelectronics STLBC01 Datasheet HTML 22Page - STMicroelectronics STLBC01 Datasheet HTML 23Page - STMicroelectronics STLBC01 Datasheet HTML 24Page - STMicroelectronics STLBC01 Datasheet HTML 25Page - STMicroelectronics STLBC01 Datasheet HTML 26Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 22 / 40 page
background image
Host controller interface (HCI)
STLBC01
22/40
DocID022984 Rev 2
In addition to standard commands, a set of HCI proprietary commands for dealing with the
power modes and some parameters linked to RF performance are supported. The complete
list of supported proprietary HCI commands is available in
Section 7.
The STBLC01 supports the two different transport layers for HCI according to the level of
the SEL pin:
1.
SEL = 0: UART interface as defined in [
2], volume 4, part A.
2.
SEL = 1: SPI interface with proprietary flow control.
6.1
HCI UART transport layer
The STBLC01 contains a 2-pin UART compatible for communication protocol with 16450,
16550 and 16750 standards. The baud rate can be set by the host by sending the related
HCI command (refer to
Section 7). The default baud rate is 115.2 kbps.
6.1.1
UART interface
The UART interface is through the following pins:
UART_RX: UART receiver line
UART_TX: UART transmitting line
6.1.2
UART settings
The HCI UART transport layer uses the following settings for RS232:
Baud rate: configurable via HCI
The default baud rate is 115.2 kbps. The default value is only set by POR or the RST
pin
Number of data bits: 8
Parity bit: no parity
Start bit: 1 start bit
Stop bit: 1 stop bit
Flow control: not used
Table 14. HCI event format
Byte #
Parameter
Size
Description
1Packet_ID
1
Packet ID: Packet Identifier
– For HCI Event Packet_ID = 0x04
2
Event_Code
1
Each event is assigned a one-byte event code to uniquely
identify different types of events. Range: 0x00 to 0xFF,
where 0xFF is reserved for Vendor specific events.
3
Parameter_Total_Le
ngth
1
Lengths of all the parameters contained in the given event
packet
Event_Parameter_0
Each event has a specific number of parameters associated
with it. These parameters and the size of each of the
parameters are defined for each event. Each parameter is
an integer number of octets in size.
...
Event_Parameter_N



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com