kHz SMD Type CERAFIL

r Notice

Continued on the following page.

Filter is soldered twice within the following temperature

conditions.

1. Standard Reflow Soldering Conditions

2. Wash

(1) Reflow

Electrode is directly soldered with the tip of soldering iron

at +350±5°C for 3.0±0.5 seconds.

(2) Soldering Iron

Do not use strong acidity flux, more than 0.2wt% chlorine

content, in reflow soldering.

(3) Other

2 minutes max. in above solvent at +60°C max.

2 minutes max. in above solvent at +60°C max.

CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),

(Cleanthrough-750H, Pine Alpha 100S), Silicon

3. Coating

In case of overcoating the component, conditions such as

material of resin, cure temperature, and so on should be

evaluated well.

(1) Cleaning Solvent

(2) Cleaning Conditions

maintain the temperature of components below the

temperature of solvent.

your application circuit.

solvent.

consult with Murata or Murata representative prior to

using.

(3) Notice

o Soldering and Mounting

(260°C max.)

Heating

(230°C)

Gradual

Cooling

Pre-heating

(150-180°C)

100

230

260

60-120 sec.

max.

30 sec.

min.

120 sec.

min.

c SFPKA/CFUKG/CFUKF Series Notice

P05E.pdf

Nov.24,2011

17

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.