STM32F415RG datasheet(37/186 Pages) STMICROELECTRONICS

37 / 186 page

DocID022063 Rev 4

37/186

STM32F415xx, STM32F417xx

Description

2.2.32

Digital camera interface (DCMI)

The camera interface is not available in STM32F415xx devices.

STM32F417xx products embed a camera interface that can connect with camera modules

and CMOS sensors through an 8-bit to 14-bit parallel interface, to receive video data. The

camera interface can sustain a data transfer rate up to 54 Mbyte/s at 54 MHz. It features:

•

Programmable polarity for the input pixel clock and synchronization signals

•

Parallel data communication can be 8-, 10-, 12- or 14-bit

•

Supports 8-bit progressive video monochrome or raw bayer format, YCbCr 4:2:2

progressive video, RGB 565 progressive video or compressed data (like JPEG)

•

Supports continuous mode or snapshot (a single frame) mode

•

Capability to automatically crop the image

2.2.33

Cryptographic acceleration

The STM32F415xx and STM32F417xx devices embed a cryptographic accelerator. This

cryptographic accelerator provides a set of hardware acceleration for the advanced

cryptographic algorithms usually needed to provide confidentiality, authentication, data

integrity and non repudiation when exchanging messages with a peer.

These algorithms consists of:

Encryption/Decryption

–

DES/TDES (data encryption standard/triple data encryption standard): ECB

(electronic codebook) and CBC (cipher block chaining) chaining algorithms, 64-,

128- or 192-bit key

–

AES (advanced encryption standard): ECB, CBC and CTR (counter mode)

chaining algorithms, 128, 192 or 256-bit key

Universal hash

–

SHA-1 (secure hash algorithm)

–MD5

–HMAC

The cryptographic accelerator supports DMA request generation.

2.2.34

Random number generator (RNG)

All STM32F415xx and STM32F417xx products embed an RNG that delivers 32-bit random

numbers generated by an integrated analog circuit.

2.2.35

General-purpose input/outputs (GPIOs)

Each of the GPIO pins can be configured by software as output (push-pull or open-drain,

with or without pull-up or pull-down), as input (floating, with or without pull-up or pull-down)

or as peripheral alternate function. Most of the GPIO pins are shared with digital or analog

alternate functions. All GPIOs are high-current-capable and have speed selection to better

manage internal noise, power consumption and electromagnetic emission.

The I/O configuration can be locked if needed by following a specific sequence in order to

avoid spurious writing to the I/Os registers.

Fast I/O handling allowing maximum I/O toggling up to 84 MHz.

STM32F415RG 数据表(PDF) 37 Page - STMicroelectronics

STM32F415RG 数据表(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载