I2CSTAT datasheet(138/210 Pages) MICROCHIP

138 / 210 page

dsPIC30F2011/2012/3012/3013

DS70139G-page 138

All instructions are a single word, except for certain

double-word

instructions,

which

were

made

double-word instructions so that all the required

information is available in these 48 bits. In the second

word, the 8 MSbs are ‘0’s. If this second word is

executed as an instruction (by itself), it will execute as

a NOP.

Most single-word instructions are executed in a single

instruction cycle, unless a conditional test is true or the

program counter is changed as a result of the

instruction. In these cases, the execution takes two

instruction

cycles

with

the

additional

instruction

cycle(s) executed as a NOP. Notable exceptions are the

BRA

(unconditional/computed

branch),

indirect

CALL/GOTO

all

table

reads

and

writes,

and

RETURN/RETFIE

instructions, which are single-word

instructions but take two or three cycles. Certain

instructions that involve skipping over the subsequent

instruction require either two or three cycles if the skip

is performed, depending on whether the instruction

being skipped is a single-word or two-word instruction.

Moreover, double-word moves require two cycles. The

double-word instructions execute in two instruction

cycles.

Note:

For more details on the instruction set,

refer to the “MCU and DSC Programmer’s

Reference Manual” (DS70157).

TABLE 18-1:

SYMBOLS USED IN OPCODE DESCRIPTIONS

Field

Description

#text

Means literal defined by “text”

(text)

Means “content of text”

[text]

Means “the location addressed by text”

{ }

Optional field or operation

<n:m>

Byte mode selection

Double-Word mode selection

Shadow register select

Word mode selection (default)

Acc

One of two accumulators {A, B}

AWB

Accumulator write-back destination address register

∈ {W13, [W13]+=2}

bit4

4-bit bit selection field (used in word addressed instructions)

∈ {0...15}

C, DC, N, OV, Z

MCU Status bits: Carry, Digit Carry, Negative, Overflow, Sticky Zero

Expr

Absolute address, label or expression (resolved by the linker)

File register address

∈ {0x0000...0x1FFF}

lit1

1-bit unsigned literal

∈ {0,1}

lit4

4-bit unsigned literal

∈ {0...15}

lit5

5-bit unsigned literal

∈ {0...31}

lit8

8-bit unsigned literal

∈ {0...255}

lit10

10-bit unsigned literal

∈ {0...255} for Byte mode, {0:1023} for Word mode

lit14

14-bit unsigned literal

∈ {0...16384}

lit16

16-bit unsigned literal

∈ {0...65535}

lit23

23-bit unsigned literal

∈ {0...8388608}; LSB must be 0

None

Field does not require an entry, may be blank

OA, OB, SA, SB

DSP Status bits: ACCA Overflow, ACCB Overflow, ACCA Saturate, ACCB Saturate

Program Counter

Slit10

10-bit signed literal

∈ {-512...511}

Slit16

16-bit signed literal

∈ {-32768...32767}

Slit6

6-bit signed literal

∈ {-16...16}

I2CSTAT 数据表(PDF) 138 Page - Microchip Technology

I2CSTAT 数据表(HTML) 138 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载