ACT413

Rev 2, 27-Feb-14

- 9 -

www.active-semi.com

Copyright © 2014 Active-Semi, Inc.

Active-Semi Proprietary―For Authorized Recipients and Customers

ActivePSR

FB Over Voltage Protection

The

ACT413

includes

output

over-voltage

protection circuitry, which shuts down the IC when

the output voltage is 40% above the normal

regulation voltage 4 consecutive switching cycles.

The ACT413 enters hiccup mode when an output

over voltage fault is detected.

VDD Over Voltage Protection

ACT413 can monitor the converter output voltage.

The voltage generated by the auxiliary winding

tracks converter’s output voltage through VDD,

design value for four consecutive cycles, IC will

enter the restart process. A counter is used to

reduce sensitivity to noise and prevent the auto

start unnecessary.

Open Loop Protection

ACT413 is able to protect itself from damage when

the control loop is open. The typical open loop

condition includes either VFB floating or RFB5

open.

Over Temperature Shutdown

The thermal shutdown circuitry detects the ACT413

die temperature. The threshold is set at typical

135˚C. When the die temperature rises above this

threshold (135˚C) the ACT413 is disabled and

remains disabled until the die temperature falls

below 115˚C, at which point the ACT413 is re-

enabled.

TYPICAL APPLICATION CONT’D