DC System Voltage (VDC)

48

Battery Pack Accessory (Optional)

98-121 sealed lead acid battery (optional)

Battery Charge

Selectable 23 / 90 amp

Expandable Runtime

Yes

VOLTAGE REGULATION

Voltage Regulation Description

Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels

Overvoltage Correction

Over-voltages are automatically reduced by 10%

Brownout Correction

Brownouts are automatically boosted by 10% and 20%

USER INTERFACE, ALERTS & CONTROLS

Front Panel LEDs

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7

levels reported). See manual for sequences.

Switches

3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant

on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in

inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to

battery power - to maintain continuous AC power to connected loads.

PHYSICAL

Shipping Dimensions (hwd / in.)

17.13 x 23.82 x 14.17

Shipping Dimensions (hwd / cm)

43.51 x 60.5 x 36

Shipping Weight (lbs.)

125

Shipping Weight (kg)

56.25

Unit Dimensions (hwd / in.)

10 x 19.5 x 9

Unit Dimensions (hwd / cm)

25.5 x 49.5 x 22.71

Unit Weight (lbs.)

106

Unit Weight (kg)

47.7

Cooling Method

Dual multi-speed fan

Material of Construction

Metal

ENVIRONMENTAL

Relative Humidity

0-95% non-condensing

LINE / BATTERY TRANSFER

Transfer Time (Line Power to

Battery Mode)

Dip-switch selectable 20 millisecond (full cycle) / 10 millisecond (half-cycle) transfer times which are compatible with

many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications

Low Voltage Transfer to Battery

Power

In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user

adjustable to 180V). In 208V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to

165V (user adjustable to 175V)-see manual

3 / 4