PowerVerter APS X 6000W 48VDC 208/230V

Inverter/Charger with Line-Interactive AVR,

Hardwired

MODEL NUMBER: APSX6048VRNET

Description

Tripp Lite's APSX6048VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging

system serves as an extended run UPS, a standalone power source or an inverter. Supplies up to 6000 watts of

continuous 208 or 230V sine wave AC power from any 48V battery or automotive DC source. When hardwire AC

input is energized, commercial power passes through to connected equipment and the battery set is recharged

via 3 stage, 23/90 amp charging system. In UPS mode, the APS system responds to blackouts and severe

voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of

high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual

for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power

operation, and sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation

(AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging

and UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic

loads or large inductive motors, compressors and other items with high current needs on startup. Optional

APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and

continuous status information (part# APSRM4 sold separately). Supports an unlimited amount of runtime with

any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site

conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer

voltages. DB9 communication port for SNMPWEBSOLOHV management.

Features

Supports 208/230V AC output from a 208/230V AC line power source or 48V DC battery source

6000W continuous sinewave AC output in inverter mode

Double Boost output supports momentary start-up loads up to 200% of the continuous rating for up to 10 seconds (see specification chart) - OverPower

output supports longer duration overloads to 150% for up to 60 seconds

3-stage, selectable 23/90 amp battery charger with adjustable settings for wet/gel battery types

Highlights

48V DC or 208/230V (selectable)

AC input; 208/230V, 50/60 Hz,

pure sine wave output

(hardwired)

6000 watts continuous, 9000

watts OverPower and 12000

watts DoubleBoost inverter output

3-stage, 23/90 amp selectable

wet/dry cell battery charger; Auto

Transfer Switching; Automatic

Voltage Regulation

DB9 communication port for

SNMPWEBSOLOHV

management.

Excellent for alternative power

and standby power needs.

Applications

Ideal for RVs, over-the-road

trucking, conversion vans and

fleet service vehicles; a

standalone alternative power

source for off-grid, alternative

energy or export applications,

and as an uninterruptible power

supply (UPS). NOTE: For sump

pump applications, Tripp Lite

recommends its APS Truck

Inverter/Chargers.

Package Includes

APSX6048VRNET

Inverter/Charger

Instruction manual with warranty

information

1 / 4