| 数据搜索系统,热门电子元器件搜索 |
|
AN4101 数据表(PDF) 10 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4101 数据表(HTML) 10 Page - STMicroelectronics |
|
10 / 21 page ![]() Implementing a LIN slave node with STM8AF board AN4101 10/21 Doc ID 23127 Rev 1 5 Implementing a LIN slave node with STM8AF board 5.1 STM8AF microcontroller LINUART features for LIN slave LINUART supports autonomous handling of LIN headers. The software is notified of header reception through a dedicated flag, LHDF. This means that a single interrupt occurs only when the entire header is received, including the Break, the Synch Field and the Identifier Field. LINUART implements a mute mode, allowing the software to remain quiet without generating any interrupts until reception of the next header. This is very useful for filtering frames for which the STM8AF is neither publisher nor subscriber. All data bytes of the frame response will thus be ignored by the LINUART, and will not generate any interrupts. The automatic resynchronization feature allows a LIN slave to be built with the STM8AF microcontroller, without the need for an external crystal, oscillator or resonator. The LINUART can synchronize on the Synch Field of each received header, and automatically adjusts the baudrate prescaler in order to receive and send the rest of the frame with the right frequency tolerance, whatever the frequency deviation of the embedded internal RC oscillator (HSI) may be. If one of the following errors is detected during the header reception, the software is notified through the LHE flag: ● resynchronization error, if the deviation is greater than 14% ● identifier error (framing error or parity error) ● break delimiter error, if the delimiter is too short ● header timeout, if the LIN header is longer than the T_HEADER_MAX defined in the LIN standard In order to enhance system robustness, the LINUART can detect a Break at any time, even while receiving a data byte, and resynchronizes upon detecting the Break. 5.2 Software algorithm The software algorithm described below is NOT implemented in the demonstration software of the STM8A-DISCOVERY. Refer to AN4178 to use another piece of demonstration software for the STM8A-DISCOVERY running the STM8AF board as a LIN slave. Note: The demonstration described in AN4178 is based on two STM8AF boards connected together: one a LIN master, and the other a LIN slave. 5.2.1 LIN state machine The LIN task is called regularly by the main routine. This task is a basic LIN slave driver that implements a state machine with the following states: ● Idle ● Identifier ● DataReception ● DataTransmission |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |