| 数据搜索系统,热门电子元器件搜索 |
|
ST111 数据表(PDF) 6 Page - Seiko Instruments Inc |
|
|
|||||||||||||||||||||||||||||
ST111 数据表(HTML) 6 Page - Seiko Instruments Inc |
|
6 / 23 page ![]() HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR S-T111 Series Rev.3.1_00 Seiko Instruments Inc. 6 Electrical Characteristics Table 4 (Ta = 25°C unless otherwise specified) Item Symbol Condition Min. Typ. Max. Unit Test Circuit Output voltage *1 VOUT(E) VIN = VOUT(S) + 1.0 V, IOUT = 30 mA VOUT(S) × 0.99 VOUT(S) VOUT(S) × 1.01 V 1 Output current *2 IOUT VIN ≥ VOUT(S) + 1.0 V 150 *5 ⎯ ⎯ mA 3 Dropout voltage *3 Vdrop IOUT = 50 mA 1.5 V ≤ VOUT(S) ≤ 2.7 V Not specified V 1 2.8 V ≤ VOUT(S) ≤ 5.5 V ⎯ 0.08 0.14 V 1 IOUT = 100 mA 1.5 V ≤ VOUT(S) ≤ 1.6 V ⎯ 0.32 0.55 V 1 1.7 V ≤ VOUT(S) ≤ 1.8 V ⎯ 0.28 0.47 V 1 1.9 V ≤ VOUT(S) ≤ 2.3 V ⎯ 0.25 0.35 V 1 2.4 V ≤ VOUT(S) ≤ 2.7 V ⎯ 0.20 0.29 V 1 2.8 V ≤ VOUT(S) ≤ 5.5 V ⎯ 0.19 0.26 V 1 Line regulation OUT IN OUT1 V V V • Δ Δ VOUT(S) + 0.5 V ≤ VIN ≤ 6.5 V, IOUT = 30 mA ⎯ 0.05 0.2 %/V 1 Load regulation ΔVOUT2 VIN = VOUT(S) + 1.0 V, 1.0 mA ≤ IOUT ≤ 80 mA ⎯ 12 40 mV 1 Output voltage temperature coefficient *4 OUT OUT V Ta V • Δ Δ VIN = VOUT(S) + 1.0 V, IOUT = 10 mA, −40°C ≤ Ta ≤ 85°C ⎯ ±100 ⎯ ppm/ °C1 Current consumption during operation ISS1 VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON, no load ⎯ 50 90 μA 2 Current consumption during power-off ISS2 VIN = VOUT(S) + 1.0 V, ON/OFF pin = OFF, no load ⎯ 0.1 1.0 μA 2 Input voltage VIN ⎯ 2.0 ⎯ 6.5 V ⎯ ON/OFF pin input voltage “H” VSH VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ 1.5 ⎯ ⎯ V 4 ON/OFF pin input voltage “L” VSL VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ ⎯ ⎯ 0.3 V 4 ON/OFF pin input current “H” ISH VIN = 6.5 V, VON/OFF = 6.5 V −0.1 ⎯ 0.1 μA 4 ON/OFF pin input current “L” ISL VIN = 6.5 V, VON/OFF = 0 V −0.1 ⎯ 0.1 μA 4 Ripple rejection RR VIN = VOUT(S) + 1.0 V, f = 1.0 kHz, ΔVrip = 0.5 Vrms, IOUT = 30 mA ⎯ 80 ⎯ dB 5 Short-circuit current Ishort VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON, VOUT = 0 V ⎯ 200 ⎯ mA 3 *1. VOUT(S): Set output voltage VOUT(E): Actual output voltage Output voltage when fixing IOUT (= 30 mA) and inputting VOUT(S) + 1.0 V *2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current. *3. Vdrop = VIN1 − (VOUT3 × 0.98) VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 50 mA or IOUT = 100 mA. VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input voltage. *4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation. ΔVOUT ΔTa [] mV/°C *1 = V OUT(S) [] V *2 × ΔVOUT ΔTa • VOUT [] ppm/°C *3 ÷ 1000 *1. Change in temperature of output voltage *2. Set output voltage *3. Output voltage temperature coefficient *5. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |