E5EZ-PRR

45

Setting Level Configuration and Key Operations

Parameters are divided into groups, each called a “level.” Each of the set values (setup items) in these levels are called a “parameter.”

The parameters on the E5EZ-PRR are divided into the following seven levels:

Note: 1. When returning from the initial setting level to the operation level, the

default in the operation level will be displayed.

2. When returning from the protect level to the operation level, the

default in the operation level will be displayed.

Note: Set the parameters in the “initial setting/communications protect” under “protect level” to “0”, to activate advanced function setting level.

Of these levels, the initial setting level, communications setting level, and advanced function setting level can be used only when control has

stopped. Note that controller outputs are stopped when any of these three levels are selected.

With the exception of operation level, the present level will be displayed. No. 3 display will show the following when settings are being

changed:

No. 3 Display

Level name

Manual MV

Manual control level

l.prt

Protect level

No display

Operation level

l.adj

Adjustment level

l.ini

Initial setting level

l.com

Communications setting level

l.adv

Advanced function setting level

key

for at least 3 s

*

L

L

key:

PV display flashes

+

+

M

M

* The time taken to move to the

protect level can be adjusted by

changing the "Move to protect level

time" setting.

Input password.

Set value

−169

Control in progress

Control stopped

Operation Level

Not displayed for some models

Level change

Initial Setting Level

Communications

Setting Level

Adjustment Level

Protect Level

Power ON

Manual

Control Level

Started in manual mode

Press the

for at least 1 s.

Started in automatic mode

Manual

Mode

Press the

keys

for at least 1 s.

Advanced Function

Setting Level

See note 1.

Control stops.

See note 2.

25

100

c

100.0

25

100

c

100.0

Press

for at least 1 s.

Press the

for at least 1 s;

display will flash.

Press the

at least 3 s.

Press

less than 1 s.

Press the

at least 1 s.

Press

less than 1 s.

Press the

at least 1 s.

Control in Progress Control Stopped

Protect level

Can be set.

---

Operation level

Can be set.

---

Adjustment level

Can be set.

---

Manual control level

Can be set.

---

Initial setting level

---

Can be set.

Advanced function setting level (See note.) ---

Can be set.

Communications setting level

---

Can be set.