| 数据搜索系统,热门电子元器件搜索 |
|
USB2250 数据表(PDF) 29 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB2250 数据表(HTML) 29 Page - Microchip Technology |
|
29 / 43 page ![]() 2009 - 2015 Microchip Technology Inc. DS00002005A-page 29 USB2250/50i/51/51i 7.2.5.6 CEh-D2h: Inquiry Product String 7.2.5.7 D3h: Dynamic Number of LUNs 7.2.5.8 D4h-D7h: Device to LUN Mapping 7.2.5.9 D8h-FBh: Not Applicable 7.2.5.10 FCh-FFh: Non-Volatile Storage Signature Byte Name Description 4:0 INQ_PRD_STR If bit 4 of the 1st attribute byte is set, the device will use these strings in response to a USB inquiry command, instead of the USB descriptor manufacturer and product ID strings. Byte Name Description 7:0 DYN_NUM_LUN These bytes are used to specify the number of LUNs the device exposes to the host. These bytes are also used for icon sharing by assigning more than one LUN to a single icon. This is used in applications where the device utilizes a combo socket and the OEM wishes to have only a single icon displayed for one or more interfaces. If this field is set to "FF", the program assumes that you are using the default value and icons will be configured per the default configuration. Byte Name Description 3:0 DEV_LUN_MAP These registers map a device controller (SD/MMC, SM, and MS) to a Logical Unit Number (LUN). The device reports the mapped LUNs to the USB host in the USB descriptor during enumeration. The icon installer associates custom icons with the LUNs specified in these fields. Setting a register to "FF" indicates that the device is not mapped. Setting all of the DEV_LUN_MAP registers for all devices to "FF" forces the use of the default mapping configuration. Not all configurations are valid. Valid configurations depend on the hardware, packaging, and OEM board layout. The number of unique LUNs mapped must match the value in the Section 7.2.5.7, "D3h: Dynamic Number of LUNs," on page 29. Byte Name Description 35:0 Not Applicable Not Applicable. Byte Name Description 3:0 NVSTORE_SIG This signature is used to verify the validity of the data in the first 256 bytes of the configuration area. The signature must be set to ‘ATA2’ for USB2250/50i/51/51i. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |