| 数据搜索系统,热门电子元器件搜索 |
|
STV82X6 数据表(PDF) 21 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV82X6 数据表(HTML) 21 Page - STMicroelectronics |
|
21 / 95 page ![]() 21/95 STV82x6 Audio Processor Block The Beeper operates in one of two modes: ● Pulse mode (beep applications) A tone with a programmable short duration (between 128 ms and 1 s) is generated. Afterwards, the beeper is automatically disabled and the output is switched back to the audio signal. ● Continuous mode (alarm application) A tone with a programmable long duration is generated. Its start and stop controls must be programmed by I²C. In both modes, it is recommended to use the mute function to smooth the audio-to-beeper and beeper-to-audio (Continuous mode only) transitions. The second transition is automatically muted in Pulse mode. Beeper parameters are controlled in register BEEPER_CTRL. The beeper tone level and frequency are programmed in register BEEPER_TONE. The level (or volume) ranges between 0 dB and -93 dB in steps of 3 dB and the tone frequency ranges between 62.2 Hz and 8 kHz in steps of 1 octave. A beep generator is shared only by the Loudspeaker or Headphone outputs. Therefore, in the event of simultaneous beeps when in Pulse mode, only the first beep will define the effective duration that will be the same for both outputs. Note: The audio output is not affected by the Automatic Mute Control of Automatic Standard Recognition function when the beeper is activated. 3.10 SRS™ 3D Surround (STV8226/36 only) In addition to ST WideSurround, the STV8226/36 provides SRS™ 3D Stereo and Mono outputs which are spatial effects patented by SRS Labs. The SRS™ system is available on the IC when the SRS_ON bit of register CUT_ID is set (STV8226/36 identification). ST and SRS™ Surround systems cannot be used simultaneously. These signals are output only on the Loudspeaker path. Figure 12: Pulse Mode Figure 13: Continuous Mode 0.125s < T < 1s 62.5 Hz < F < 8 kHz BEEP_ON = 1 BEEP_ON = 0 T predefined 62.5 Hz < F < 8 kHz BEEP_ON = 1 BEEP_ON = 0 T defined by I²C write |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |