MT9072AB datasheet(39/275 Pages) ZARLINK

39 / 275 page

MT9072

Data Sheet

Zarlink Semiconductor Inc.

2.6

Access to the Maintenance Channel

The T1 ESF Facility Data Link (FDL) bits can be accessed in the following three ways: Through the data link pins

TxDL, RxDL, RxDLC and TxDLC or through internal registers for Bit Oriented Messages or through the embedded

HDLC.

In E1 mode the Sa bits (bits 4-8 of the non-frame alignment signal) can be accessed in four ways: Through data

link pins TxDL, RxDL, RxDLC and TxDLC or through single byte transmit and receive registers or through five

byte transmit and receive national bit buffers or through the embedded HDLC.

2.7

Robbed Bit Signaling/Channel Associated Signaling

Robbed bit signaling and channel associated signaling information can be accessed two ways: Via the microport;

via the CSTi and CSTo pins. Signaling information is frozen upon loss of multiframe alignment.

In T1 mode the MT9072 supports AB and ABCD robbed bit signaling. Robbed bit signaling can be enabled on a

channel by channel basis.

In E1 mode the MT9072 supports Channel Associated Signaling (CAS) multiframing.

2.8

Common Channel Signaling

MT9072 supports Common Channel Signaling (CCS) with the embedded HDLCs and with the capability to map

external HDLCs to/from the transmit/receive timeslots.

In T1 mode CCS is supported in any one channel by using the embedded HDLC. Alternatively, the CSTi and CSTo

pins can be used to map an external HDLC channel to/from any one transmit/receive T1 channel.

In E1 mode CCS is supported in any one timeslot by using the embedded HDLC. Alternatively, the CSTi and CSTo

pins can be used to map three external HDLC channels to/from any of transmit/receive E1 timeslots 15, 16 and 31.

2.9

HDLCs

The MT9072 provides one embedded HDLC per framer with 32 byte deep transmit and receive FIFOs.

In T1 mode the embedded HDLC can be assigned to the FDL or any channel. It can operate at 4 kbit/s (Data Link),

56 kbit/s or 64 kbit/s.

In E1 mode the embedded HDLC can be assigned to timeslot zero Sa bits (bits 4-8 of the non-frame alignment

signal), or any other timeslot. It can operate at 4, 8, 12, 16, 20 (Data Link) or 64 kbit/s.

2.10

Performance Monitoring and Debugging

The MT9072 has a comprehensive suite of performance monitoring and debugging features. These include error

counters, loopbacks, deliberate error insertion and a 215 –1 QRS/PRBS generator/detector.

2.11

Interrupts

The MT9072 provides a comprehensive set of maskable interrupts. Interrupt sources consist of synchronization

status, alarm status, counter indication and overflow, timer status, slip indication, maintenance functions and

receive signaling bit changes.

MT9072AB 数据表(PDF) 39 Page - Zarlink Semiconductor Inc

MT9072AB 数据表(HTML) 39 Page - Zarlink Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载