TMP05/TMP06

Rev. 0 | Page 8 of 28

ABSOLUTE MAXIMUM RATINGS

Table 4.

Parameter

Rating

–0.3 V to +7 V

Digital Input Voltage to GND

Maximum Output Current (OUT)

±10 mA

Operating Temperature Range1

–40°C to +150°C

Storage Temperature Range

–65°C to +160°C

150°C

5-Lead SOT-23

Power Dissipation2

Thermal Impedance4

240°C/W

5-Lead SC-70

Power Dissipation2

Thermal Impedance4

207.5°C/W

172.3°C/W

IR Reflow Soldering

Peak Temperature

220°C (0°C/5°C)

Time at Peak Temperature

10 s to 20 s

Ramp-Up Rate

2°C/s to 3°C/s

Ramp-Down Rate

–6°C/s

for more than a total of 5% (5,000 hours) of the lifetime of the device. Any

exposure beyond this limit affects device reliability.

values relate to the package being used on a 4-layer PCB. See Figure

for a

plot of maximum power dissipation versus ambient temperature (T

4

A

).

preferential flow direction, for example, components mounted on a heat

sink. Junction-to-ambient resistance is more useful for air-cooled PCB

mounted components.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0

–40

–20

0

20

40

60

80

100

120

140

TEMPERATURE (

°C)

SC-70

SOT-23

Figure 4. Maximum Power Dissipation vs. Temperature

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.