TMP05/TMP06

Rev. 0 | Page 9 of 28

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

TOP VIEW

(Not to Scale)

OUT

1

CONV/IN

2

FUNC

3

5

GND

4

TMP05/

TMP06

Figure 5. Pin Configuration

Table 5. Pin Function Descriptions

Pin No.

Mnemonic

Description

1

OUT

Digital Output. Pulse-width modulated (PWM) output gives a square wave whose ratio of high to low period is

proportional to temperature.

2

CONV/IN

Digital Input. In continuously converting and one shot operating modes, a high, low, or float input determines the

temperature measurement rate. In daisy-chain operating mode, this pin is the input pin for the PWM signal from

the previous part on the daisy chain.

3

FUNC

Digital Input. A high, low, or float input on this pin gives three different modes of operation. For details, see the

Operating Modes section.

4

GND

Analog and Digital Ground.

5

Positive Supply Voltage, 3.0 V to 5.5 V. Use of a decoupling capacitor of 0.1 µF as close as possible to this pin is

strongly recommended.