STM32F412RG datasheet(74/193 Pages) STMICROELECTRONICS

74 / 193 page

Electrical characteristics

STM32F412xE/G

74/193

DocID028087 Rev 4

6.1.7

Current consumption measurement

Figure 22. Current consumption measurement scheme

6.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 12: Voltage characteristics,

Table 13: Current characteristics, and Table 14: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Table 12. Voltage characteristics

Symbol

Ratings

Min

Max

Unit

VDD–VSS

External main supply voltage (including VDDA, VDD,

VDDUSB and VBAT)(1)

1. All main power (VDD, VDDA, VDDUSB) and ground (VSS, VSSA) pins must always be connected to the

external power supply, in the permitted range.

–0.3

4.0

VIN

Input voltage on FT and TC pins(2)

2. VIN maximum value must always be respected. Refer to Table 13 for the values of the maximum allowed

injected current.

VSS–0.3 VDD+4.0

Input voltage on any other pin

VSS–0.3

4.0

Input voltage for BOOT0

VSS

9.0

ΔVDDx|

Variations between different VDD power pins

|VSSX −VSS|

Variations between all the different ground pins

VESD(HBM)

Electrostatic discharge voltage (human body model)

see Section 6.3.14:

Absolute maximum

ratings (electrical

sensitivity)

STM32F412RG 数据表(PDF) 74 Page - STMicroelectronics

STM32F412RG 数据表(HTML) 74 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载