 2004 - 2016 Microchip Technology Inc.

DS00002119A-page 21

USB2601/USB2602

Note 6-4

Output leakage is measured with the current pins in high impedance.

Note 6-5

See Appendix A for USB DC electrical characteristics.

Note 6-6

The Maximum power dissipation parameters of the package should not be exceeded

Note 6-7

The assignment of each Integrated Card Power FET to a designated Card Connector is controlled

by both firmware and the specific board implementation. Firmware will default to the settings listed in

Table 8-1, “GPIO Usage (ROM Rev -01),” on page 25.

Integrated Power FET for

GPIO11

Output Current

Short Circuit Current Limit

On Resistance

Output Voltage Rise Time

200

181

2.1

800

mA

mA



s

GPIO11;

GPIO11;

GPIO11;

GPIO11;

Supply Current Hub, Card Read-

er, Unconfigured

High-Speed Host

Full-Speed Host

90

83

mA

mA

Supply Current

Configured

(High-Speed Host)

3 Ext Ports @HS

Card Reader Active

302

mA

Total from all supplies

Supply Current

Configured

(High-Speed Host)

1 Ext Port @HS

Card Reader Active

242

mA

Total from all supplies

Supply Current

Configured

(Full-Speed Host)

1 Ext Port @ FS/LS

Card Reader Active

200

mA

Total from all supplies

Supply Current

Suspend

298

mA

Total from all supplies.

Supply Current

Reset

91

mA

Total from all supplies.

Parameter

Symbol

MIN

TYP

MAX

Units

Comments