5

N.FL Series

This jig is used for extraction from a mating condition.

U. FL/

90

50

All dimensions: mm

Note: When mating with corresponding part (N.FL-R-

SMT-1) must be pressed down and held to make

complete connection.

Part No.

HRMJ-N.FLP-ST5

HRS No.

RoHS

311-0423-2

All dimensions: mm

(18.3)

5.5

6

1/4-36UNS-2A

(4)

Note: Applicable to all the U.FL-LP(V)-040, U.FL-LP-062 and N.FL.

Part No.

U.FL-LP(V)-N-2

RoHS

HRS No.

331-0493-2

Plug extraction tool

Note: Applicable to both N.FL and U.FL.

Part No.

HRMJ-U.FLP(40)

HRS No.

RoHS

311-0301-5 40

All dimensions: mm

Note: The FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

14.05

1/4-36UNS-2A

65.6

(4.05)

■Conversion Adapters

Part No.

HRMP-U.FLJ(40)

HRS No.

RoHS

311-0300-2 40

All dimensions: mm

Note: The FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

(10.7)

8HEX

Note: Applicable to both N.FL and U.FL.

■Receptacle Inspection Adapter

Part No.

U.FL-R-1

HRS No.

RoHS

331-0466-0

All dimensions: mm

Used for inspecting the performance

parameters of the cable assembly.

12.9

5

7HEX

M5∞0.5

1

(7.9)

(4.4)

(12.9)

For distinction with

W.FL-LP-IN.

All dimensions: mm

Part No.

U.FL-LP-IN

RoHS

HRS No.

331-0334-9

This tool is used for mating a plug.

Plug mating tool

Note: Applicable to both N.FL and U.FL.