6

N.FL Series

1. Plug

■Usage Precautions

U.FL-LP(V)-N-2

Extraction tool

N.FL-LP-040

Plug

N.FL-R-SMT-1

Receptacle

(1) Mating / unmating

(2) Pull forces on the

cable after connectors

are mated

(3) Precautions

• Unmating

Insert the end of an extraction tool into a space between a plug and receptacle, and pull up

the tool in the perpendicular to a mounting surface of a receptacle, as shown in the figure.

●Recomended the use of the extraction tool for unmating.

Any attempt of unmating by pulling on the cable may

result in damage to the mechanical / electrical performance.

• Mating

Do not attempt to insert on an extreme angle.

Do not twist connectors excessively during mating / unmating.

N.FL-LP-040

Plug

2.9N max.

N.FL-R-SMT-1

Receptacle

Do not apply any pull forces after the bending

of the cable.

2. Receptacle

(1) Recommended reflow

temperature profile

q The temperature profile indicates the board surface temperature at the point of contacts with the connector

leads.

w In individual applications the actual temperature may vary, depending on the solder paste type, volume /

thickness and board size / thickness. Consult your solder paste and equipment manufacturer for the

detailed recommendations.

Soldering iron temperature: 350°C, Soldering time: for 5 seconds max.

(2) Manual soldering

(3) Recommended metal

mask thickness

0.1 mm to 0.12 mm

(4) Reflow cycles

2 times

80

100

120

140

160

180

200

220

240

260

[ç]

Preheat

(130 to 180ç)

230ç

220ç

50 seconds max.

120 seconds max.

60 seconds max.

Time

250 ç max. for

10 seconds

(1) Operating environment

The connectors are not designed to operate in the following environments:

•

Exposed to a excessive amounts of fine particles and dust

•

Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive

gasses.

•

Environments having large rapid variations in temperature.

(2) Storage conditions -

Receptacle

Store in the Hirose Electric packaging.

Temperature: -10 to +40ç, Humidity: 85% max.

Use within 6 months of delivery.

Receptacles for which the storage period has elapsed must be tested for solderability to the PC board

mounting surface.

3. Operating environment and storage conditions

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 10/2014. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

®