PISA11.CLASS2

PISA11-Series

PISA11.CLASS2

No-load losses

typ.

1.0W

typ.

1.6W

*)

Typical value when all output channels are loaded with 50% of its nominal current.

The PISA protection modules are extremely reliable and use only the highest quality materials. The number of critical

components such as electrolytic capacitors have been reduced.

PISA11.CLASS2

Applied load

4x1.9A

220 000h *)

at 40°C

622 000h *)

at 25°C

2 198 000h

at 40°C

3 784 000h

at 25°C

734 000h

at 40°C

1 009 000h

at 25°C

*)

The Lifetime expectancy shown in the table indicates the minimum operating hours (service life) and is determined by the lifetime

expectancy of the built-in electrolytic capacitors. Lifetime expectancy is specified in operational hours and is calculated according to the

capacitor’s manufacturer specification. The manufacturer of the electrolytic capacitors only guarantees a maximum life of up to 15 years

(131 400h). Any number exceeding this value is a calculated theoretical lifetime which can be used to compare devices.

**) MTBF stands for Mean Time Between Failure, which is calculated according to statistical device failures, and indicates reliability of a

device. It is the statistical representation of the likelihood of a unit to fail and does not necessarily represent the life of a product.

The MTBF figure is a statistical representation of the likelihood of a device to fail. A MTBF figure of e.g. 1 000 000h means that

statistically one unit will fail every 100 hours if 10 000 units are installed in the field. However, it can not be determined if the failed unit

has been running for 50 000h or only for 100h.

May 2014 / Rev. 1.7 DS-PISA11.CLASS2 - data sheet -

All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278-0

Germany

11/19