LM92 datasheet(12/18 Pages) NSC

12 / 18 page

1.0 Functional Description (Continued)

1.9 POINTER REGISTER

(Selects which registers will be read from or written to):

00000

P0–P2: Register Select:

Temperature (Read only) (Power-up

default)

Configuration (Read/Write)

010

HYST (Read/Write)

T_CRIT (Read/Write)

100

LOW (Read/Write)

101

HIGH (Read/Write)

Manufacturer’s ID

P3–P7: Must be kept zero.

1.10 TEMPERATURE REGISTER

(Read Only):

D15

D14

D13

D12

D11

D10

Sign

MSB

Bit

Bit 9

Bit 8

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

CRIT

HIGH

LOW

Status Bits

D0–D2: Status Bits

D3–D15: Temperature Data. One LSB = 0.0625˚C. Two’s complement format.

1.11 CONFIGURATION REGISTER

(Read/Write):

Fault Queue

INT Polarity

T_CRIT_A

Polarity

INT Mode

Shutdown

D0: Shutdown - When set to 1 the LM92 goes to low power shutdown mode. Power up default of “0”.

D1: Interrupt mode-0is Comparator Interrupt mode, 1 is Event Interrupt mode. Power up default of “0”.

D2, D3: T_CRIT_A and INT Polarity-0is active low, 1 is active high. Outputs are open-drain. Power up default of “0”

D4: Fault Queue - When set to 1 the Fault Queu is enabled,

see

Section 1.7. Power up default of “0”.

D5–D7: These bits are used for production testing and must be kept zero for normal operation.

1.12 T

HYST,TLOW,THIGH AND T_CRIT_A REGISTERS

(Read/Write):

D15

D14

D13

D12

D11

D10

Sign

MSB

Bit

Bit 9

Bit 8

Bit7

Bit6

Bit5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

D0–D2: Undefined

D3–D15: T

HYST,TLOW,THIGH or T_CRIT Trip Temperature Data. Power up default is TLOW = 10˚C, THIGH = 64˚C, T_CRIT = 80˚C,

HYST = 2˚C.

HYST is subtracted from THIGH, and T_CRIT, and added to TLOW.

Avoid programming setpoints so close that their hysteresis values overlap. See

Section 1.1.

LM92 数据表(PDF) 12 Page - National Semiconductor (TI)

LM92 数据表(HTML) 12 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

数据表下载