Functional description

STHDLS101T

12/26

4

Functional description

The section describes the basic functionality of the STHDLS101T device.

Power supply

The STHDLS101T is powered by a single DC power supply of 3.3 V ± 10%.

Clocking

This device does not retime any data. The device contains no state machines. No inputs or

outputs of the device are latched or clocked.

Reset

This device acts as a level shifter, reset is not required.

OE_N function

When OE_N is asserted (low level), the IN_D and OUT_D signals are fully functional. Input

termina-tion resistors are enabled and any internal bias circuits are turned on.

OE_N pin has an internal pull-down that enables the chip if left unconnected.

When OE_N is de-asserted (high level), the OUT_D outputs are in high impedance state.

The IN_D input buffers are disabled and the IN_D termination resistors are disabled.

Internal bias circuits for the differential inputs and outputs are turned off. Power consumption

of the chip is minimized.

The HPD_SINK input and HPD_SOURCE output are not affected by OE_N. The SCL and

SDA pass-gates are not affected by OE_N.

Table 3.

OE_N description

OE_N

Device state

Comments

Asserted (low level)

or unconnected

Differential input buffers and

output buffers enabled. Input

impedance = 50Ù

Normal functioning state for IN_D

to OUT_D level shifting function.

De-asserted (high level)

Low-power state.

Differential input buffers and

terminations are disabled.

Differential input buffers are in

high-impedance state.

OUT_D level shifting outputs are

disabled. OUT_D level shifting

outputs are in a high-impedance

state.

Internal bias currents are turned

off.

Intended for lowest power

condition when:

• No display is plugged in or

• The level shifted data path is

disabled

HPD_SINK input and

HPD_SOURCE output are not

affected by OE_N.

SCL_SOURCE, SCL_SINK,

SDA_SOURCE and SDA_SINK

signals and functions are not

affected by OE_N.

Obsolete

Product(s)

- Obsolete

Product(s)