Regulatory compliance

SPWF04SA, SPWF04SC

22/27

DocID029757 Rev 5

Modular approval, FCC and IC



FCC ID: S9NSPWFS04



IC: 8976C-SPWFS04

In accordance with FCC part 15, the modules SPWF04SA and SPWF04SC are listed

above as a modular transmitter device.

Labeling instructions

When integrating the SPWF04SA and SPWF04SC into the final product, it must be

ensured that the FCC labeling requirements specified below are satisfied. Based on the

Public Notice from FCC, the product into which the ST transmitter module is installed must

display a label referring to the enclosed module. The label should use wording like the

following:

Contains Transmitter Module



FCC ID: S9NSPWFS04



IC: 8976C-SPWFS04

Any similar wording that expresses the same meaning may also be used.

10.2.2

CE

This module complies with the following European EMI/EMC and safety directives and

standards:



EN 301 489-17 V3.1.1 (2017-02)



EN 301 489-1 V2.1.1 (2017-02)



EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013



EN 62479:2010



EN 300 328 V2.1.1 (2016-11)

The module is provided by CE marking:

Figure 10: CE label

For additional information please refer to:



STMicroelectronics Via C. Olivetti , 2 Agrate Brianza 20864 (ITALY)

The SPWF04SA / (SPWF04SC) module current production firmware release is:



1.x

(If needed, for module firmware update please refer to www.st.com)