TLE6211 datasheet(12/35 Pages) INFINEON

12 / 35 page

TLE 6210

TLE 6211

Block Description and Electrical Characteristics

V1.2 Data Sheet

2002-08

4.5

Enable-Output EN

The open collector enable output EN informs the system about any error condition. Any

error except a detected supply under-voltage will set the EN output Low. Of cause for

long under-voltage at the supply line, soon the

UST output capacitor will be discharged

and this will cause

UST under-voltage and therefore EN Low. The time depends on the

load and the output capacitor. The EN is an open collector output. It is short circuit

protected to

UST.

After power up when the first watchdog edges at WD1 a WD2 are detected the Enable

output is switched into High state.

Characteristics EN Output

6 V

£ UZP £ 18 V, -40 °C £ Tj £ +150 °C, if not otherwise specified

Parameter

Symbol

Limit Values

Unit

Conditions

min.

typ.

max.

4.5.1 Output Low voltage

–

0.4

0.2

IL £ 10 mA

IL £ 1 mA

4.5.2 Reverse current

––5

UEN = 5 V

TLE6211 数据表(PDF) 12 Page - Infineon Technologies AG

TLE6211 数据表(HTML) 12 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

数据表下载