| 数据搜索系统,热门电子元器件搜索 |
|
AW9233CSR 数据表(PDF) 17 Page - Shanghai awinic technology co.,ltd |
|
|
|||||||||||||||||||||||||||||
AW9233CSR 数据表(HTML) 17 Page - Shanghai awinic technology co.,ltd |
|
17 / 48 page ![]() AW9233 June 2018 V1.2 www.awinic.com.cn 17 Copyright © 2016 SHANGHAI AWINIC TECHNOLOGY CO., LTD 9.6.1 LED brightness controller Pulse Width Modulation (PWM) is used to adjust the brightness of LED, 256 level brightness with 9bit resolution is adapted. The PWM frequency can be configured between 122Hz or 244Hz by control bit LCR.FREQ. The ASP generates the PWM signal with dedicated and highly efficient dimming control instruction for all 9 independent LED constant current source. By programming, user-defined complicated lighting effect could be produced. The LED control instruction executed by ASP could come from LED SRAM or external I2C register. The register CTRS can choose every LED channel to be controlled by SRAM program or by I2C register. - CTRS[n] = 0, LED n controller is controlled by the internal SRAM instruction; - CTRS[n] = 1, LED n controller is controlled by the external I2C register. 9.6.2 LED Constant current driver For each LED, the maximum output constant current is 24.5mA, with 8 level adjustable by register IMAXn (n=1~3). 9.6.3 ASP ASP module is consist of one program controller and 3 PWM controllers. SRAM 256×16bits PC PWM Controller PWM Controller PWM Controller SCL SDA Program_controller Control Instruction PWM3 PWM2 PWM1 Figure 13 ASP Structure Diagram 9.6.3.1 Program Controller The program controller is clocked by 32kHz internal clock, each instruction is executed in one clock cycle. The program controller is consist of a program SRAM, an algorithmic logic unit ( ALU) and other internal registers. The 256x16bit internal SRAM is used to store LED lighting effect program loaded through I2C interface, the I2C interface also can start or stop the program execution. There are 4 internal registers RA/RB/RC/RD participating ALU operation so as to generate complicated program control such as repeating and looping. Except for that, there are 8 8bit temporary data registers(R1~R8) and 5 special function registers. Their internal address and function description is shown in the table below. Table 1 Address allocation of internal data register in ASP Register Address(HEX) Description R1 00 R1 data temporary register,8bit,I2C readable R2 01 R2 data temporary register,8bit,I2C readable |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |