| 数据搜索系统,热门电子元器件搜索 |
|
AW9233CSR 数据表(PDF) 22 Page - Shanghai awinic technology co.,ltd |
|
|
|||||||||||||||||||||||||||||
AW9233CSR 数据表(HTML) 22 Page - Shanghai awinic technology co.,ltd |
|
22 / 48 page ![]() AW9233 June 2018 V1.2 www.awinic.com.cn 22 Copyright © 2016 SHANGHAI AWINIC TECHNOLOGY CO., LTD When SRAM program running, if Ch field or value of Rx in LED control command is ‘11111’, the current command is active for all LED with setting of CTRSR.bitn=0. If Ch field or value of Rx in LED control command is ‘11110’, the current command is only active for those channel with setting of GMSKx=0. When LED instruction is come from I2C interface directly, it is recommended to use only the command with immediate data. If the Ch field in command is “11111”, the current command is only active for those LED with STRSR.bitn=1.. Table 5 LED Control Instruction explanation Instruction Description Register Parameter SETPWMR Rx Ry Set the PWM brightness level with parameter in register Rx: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Ry: Brightness level, 0~255 RAMPR Dir Rx Ry Set the Fade-in/Fade-out for specified step with parameter in register Dir: 1: Fade-in; 0: Fade-out Rx: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Ry: the step number of Fade-in/Fade-out SETSTEPTMRR Pre Rx Ry Set the RAMP slope with parameter in register Pre: basic time unit, 0: 0.5ms; 1: 16ms Rx: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Ry: RAMP step time = (Ry+1)*Pre, 0~255 Immediate Data SETPWMI Ch Im Set the PWM brightness level with immediate parameter Ch: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Im: Brightness level, 0~255 RAMPI Dir Ch Im Set the Fade-in/Fade-out for specified steps with immediate parameter Dir: 1: Fade-in; 0: Fade-out Ch: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Im: the steps of Fade-in/Fade-out SETSTEPTMRI Pre Ch Im Set the RAMP step time with immediate parameter Pre: basic unit of time, 0: 0.5ms; 1: 16ms Ch: LED channel number, 2,4,6 for LED 1~ LED 3respectively Im: RAMP step time = (Im +1)*Pre, 0~255 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |