ADMV1013

Data Sheet

Rev. A | Page 8 of 39

Pin No.

Mnemonic

Description

32

VCC_MIXER

3.3 V Power Supply for Mixer. Place a 100 pF, a 0.01 µF, and a 10 µF capacitor close to this pin.

33

VCC_BG

3.3 V Power Supply for Mixer Chip Band Gap Circuit. Place a 100 pF, a 0.01 µF, and a 10 µF capacitor

close to this pin.

34

BG_RBIAS1

Mixer Chip Band Gap Circuit, External High Precision Resistor. Place a 1.1 kΩ, high precision resistor

shunt to ground close to this pin.

35

VCC_QUAD

3.3 V Power Supply for Quadruppler. Place a 100 pF, a 0.01 µF, and a 10 µF capacitor close to this pin.

37, 38

LON, LOP

Negative and Positive Differential Local Oscillator Input. This pin is dc-coupled internally to ground

and matched to 100 Ω differential or 50 Ω single ended. If using the LO as single ended, terminate

the unused LO port with 50 Ω impedance to ground.

40

SEN

SPI Serial Enable for Mixer Chip. Connect this pin with Pin 18 (SEN2).

EPAD

Exposed Pad. Solder the exposed pad to a low impedance ground plane.