F2000D datasheet(6/6 Pages) OSRAM

6 / 6 page

2003-04-15

F 2000D

Maßzeichnung

Chip Outlines

Maße werden als typische

1) Werte wie folgt angegeben: mm (inch) / Dimensions are specified as typical1) values as

follows: mm (inch).

Published by OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

Attention please!

The information generally describes the type of component and shall not be considered as assured characteristics or

detailed specification.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our sales organization.

Handling and Storage Conditions:

The hermetically sealed shipment lot shall be opened under temperature and moisture controlled cleanroom

environment only. Customer has to follow the according rules for disposition of material that can be hazardous for

humans and environment.

Packing

Chips are placed on a blue foil, which is fixed in a yellow frame of 5” diameter.

For shipment the wafers of a shipment lot are arranged to stacks. The stacks are hermetically sealed in plastic bags to

achieve protection against environmental influence (humidity & contamination).

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You will have to bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Further Conditions:

If not otherwise arranged, the “General Conditions for the supply of products and services of the electrical and

electronics industry” apply for any shipment, just as the Supplier Addendum " Chip business" to the “General Conditions

for the supply of products and services of the electrical and electronics industry”. If these documents are not familiar to

you, please request them at our nearest sales office.

Components used in life-support devices or systems must be expressly authorized by us for such purpose!

Critical components2), may only be used in life-support devices or systems3) with the express written approval of

OSRAM OS.

1) Typical (refered to as typ.) data are defined as long-term production mean values and are only given for information.

This is not a specified value.

2)A critical component is a component used in a life-support device or system whose failure can reasonably be expected to

cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.

3)Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.

GCOY6111

p-contact

n-contact

F2000D 数据表(PDF) 6 Page - OSRAM GmbH

F2000D 数据表(HTML) 6 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6

数据表下载