31

OPA202, OPA2202, OPA4202

www.ti.com

SBOS812E – OCTOBER 2017 – REVISED FEBRUARY 2020

Product Folder Links: OPA202 OPA2202 OPA4202

Submit Documentation Feedback

Copyright © 2017–2020, Texas Instruments Incorporated

11 Device and Documentation Support

11.1 Device Support

11.1.1 Development Support

11.1.1.1 TINA-TI™ (Free Software Download)

TINA™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-TI is a

free, fully functional version of the TINA software, preloaded with a library of macro models in addition to a range

of both passive and active models. TINA-TI provides all the conventional dc, transient, and frequency domain

analysis of SPICE, as well as additional design capabilities.

Available as a free download from the Analog eLab Design Center, TINA-TI offers extensive post-processing

capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select

input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.

NOTE

These files require that either the TINA software (from DesignSoft™) or TINA-TI software

be installed. Download the free TINA-TI software from the TINA-TI folder.

11.1.1.2 WEBENCH Filter Designer Tool

WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The WEBENCH

Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers and passive

components from TI's vendor partners.

11.1.1.3 TI Precision Designs

TI Precision Designs are available online at http://www.ti.com/ww/en/analog/precision-designs/. TI Precision

Designs are analog solutions created by TI’s precision analog applications experts and offer the theory of

operation, component selection, simulation, complete PCB schematic and layout, bill of materials, and measured

performance of many useful circuits.

11.2 Documentation Support

11.2.1 Related Documentation

For related documentation see the following:

•

Texas Instruments, The PCB is a component of op amp design

•

Texas Instruments, Compensate Transimpedance Amplifiers Intuitively

•

Texas Instruments, Operational amplifier gain stability, Part 3: AC gain-error analysis

•

Texas Instruments, Operational amplifier gain stability, Part 2: DC gain-error analysis

•

Texas Instruments, Using infinite-gain, MFB filter topology in fully differential active filters

•

Texas Instruments, Op Amp Performance Analysis

•

Texas Instruments, Single-Supply Operation of Operational Amplifiers

•

Texas Instruments, Tuning in Amplifiers

•

Texas Instruments, Shelf-Life Evaluation of Lead-Free Component Finishes

•

Texas Instruments, Feedback Plots Define Op Amp AC Performance

•

Texas Instruments, EMI Rejection Ratio of Operational Amplifiers