6

OPA202, OPA2202, OPA4202

SBOS812E – OCTOBER 2017 – REVISED FEBRUARY 2020

www.ti.com

Product Folder Links: OPA202 OPA2202 OPA4202

Submit Documentation Feedback

Copyright © 2017–2020, Texas Instruments Incorporated

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

Input terminals are diode-clamped to the power-supply rails. Input signals that swing more than 0.5 V beyond the supply rails must be

current-limited to 10 mA or less.

(3)

Input terminals are anti-parallel diode-clamped to each other. Input signals that cause differential voltages of swing more than ± 0.5 V

must be current-limited to 10 mA or less.

(4)

Short-circuit to ground, one amplifier per package.

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

Supply voltage,

Single-supply

40

V

Dual-supply

±20

Signal input pins

Voltage

(V–) – 0.5

(V+) + 0.5

±0.5

Current

±10

mA

Continuous

–40

125

°C

125

–65

150

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

±2500

V

±1000

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

Supply voltage, [ (V+) – (V–) ]

Single-supply

4.5

36

V

Dual-supply

±2.25

±18

Specified temperature

–40

105

°C