A product Line of

Diodes Incorporated

47 of 51

www.diodes.com

September 2017

© Diodes Incorporated

PI3DPX1202A

Document number: DS40115 Rev.2-1

7.2

Part Marking Information

Our standard product mark follows our standard part number ordering information, except for those products with a speed letter

code. The speed letter code mark is placed after the package code letter, rather than after the device number as it is ordered. After

electrical test screening and speed binning has been completed, we then perform an “add mark” operation which places the speed

code letter at the end of the complete part number.

PI 3 X

Product IO Configuration

i.e) X

Device Family Code: X

i.e) DPX = DisplayPort Redriver, EQX = Generic Redriver, HDT=HDMI Retimer

IO Voltage Code

i.e) 3 = 3.3V

PI = Pericom

Packaging

i.e) Blank = Tube; X = Tape & Reel

X

i.e) Blank = 1st release, B1 = Type B and Version 1

Package Code

Pb-Free

i.e) E = Pb-free & Green

Temperature Range

i.e) Blank=Commerial temp, I=Industrial temp

Figure 7-3: General Part marketing information