Power Management

(14)

MSP430F5529

Switchable

12C pullups

(4)

+3.3 V

+5.0 V

DAC1

DAC2

GPIO, 12C, PWM,

and other interfaces

(shared lines)

Analog Inputs

Copyright © 2017, Texas Instruments Incorporated

www.ti.com

Overview of Hardware Design

5

SNAU228 – January 2018

Submit Documentation Feedback

Copyright © 2018, Texas Instruments Incorporated

USB2ANY Interface Adapter

Figure 2. USB2ANY Block Diagram

Figure 3 shows the USB2ANY PCB without the enclosure. One end has three interface connectors that

are typically connected to an EVM (J3, J4, and J5). Connectors J3 and J5 have eight pins and J4 has 10

pins. Most applications will use only J4 because it provides access to the most commonly used interfaces

(see Using the 10-Pin Cable in Connecting the USB2ANY). Alternatively, a 30-pin cable is provided that

connects to all three connectors (J3, J4, and J5) and provides access to all available interface signals.