or

or

Connecting the USB2ANY

www.ti.com

8

SNAU228 – January 2018

Submit Documentation Feedback

Copyright © 2018, Texas Instruments Incorporated

USB2ANY Interface Adapter

3.1

Using the 10-Pin Cable

Figure 5. 10-pin Cable Connection

The 10-pin cable is connected to J4 as Figure 5 shows and can be used for most of the popular

interfaces, including:

•

I2C: SDA and SCL

•

SPI: SCLK, MOSI, MISO, and CS

•

UART: RX and TX

•

Power: 3.3-V external

•

GPIO: GPIO0, GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO6, and GPIO7

•

PWM: PWM0, PWM1, and PWM2

•

OneWire: OW1, OW2, and OW3

•

µWire: SCLK, MOSI, MISO, and CS

•

RFFE: SCLK and SDATA

3.2

Using the 30-Pin Cable

The 30-pin cable is connected across J3, J4, and J5 as Figure 6 shows, and can be used to access all of

the available interfaces signals (see Table 2 for a list of all the signals).

Figure 6. 30-Pin Cable Connection