www.ti.com

Connecting the USB2ANY

9

SNAU228 – January 2018

Submit Documentation Feedback

Copyright © 2018, Texas Instruments Incorporated

USB2ANY Interface Adapter

3.3

Connecting the USB2ANY to the Computer

The USB2ANY has a USB Mini-B connector on the right side. Plug the provided USB cable (or any USB

cable with a Mini-B connector) into the USB2ANY. Plug the other end of the cable (USB ‘A’) into the

computer.

Figure 7. USB Connector

When connected, the LED on the USB2ANY should flicker quickly a few times, and then stay on.

3.4

Connecting the USB2ANY to an EVM

Depending on the EVM, choose either the 10-pin ribbon cable or the 30-pin ribbon cable. The majority of

EVMs use the 10-pin version, as Figure 8 shows.

Figure 8. Connection Between the USB2ANY and the EVM