13

SNAU228 – January 2018

Submit Documentation Feedback

Copyright © 2018, Texas Instruments Incorporated

USB2ANY Cable Connections

Appendix B

SNAU228 – January 2018

USB2ANY Cable Connections

The USB2ANY has four interface connectors: one USB 2.0 connector (J2) and three I/O connectors (J3,

J4, and J5). The USB connector is a standard ‘A’ type mini USB receptacle. The I/O connectors are

standard dual-row, 0.1-in center, pin headers.

I/O connectors J3 and J5 are 8-pin type and J4 is a 10-pin type. They are configured such that they will

accept either individual cable connections or a single 30-pin connection.

Figure 12. USB2ANY Interface Connectors

The standard USB2ANY kit (HPA665-001) includes both a 10-pin cable and a 30-pin cable. The 10-pin

cable is intended to be connected to J4. This single connection will supply the needs for many users as it

provides access to the following interfaces and signals:

•

I

•

SPI: SCLK, MOSI, MISO, and CS

•

UART: RX and TX

•

Power: 3.3 V External

•

GPIO: GPIO0, GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO6, and GPIO7

•

PWM: PWM0, PWM1, and PWM2

•

OneWire: OW1, OW2, and OW3

•

μWire: SCLK, MOSI, MISO, and CS

•

RFFE: SCLK and SDATA