Silicon SPDT Switch, Reflective,

100 MHz to 44 GHz

Data Sheet

ADRF5024

Rev. C

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother

rights of third parties that may result from its use. Specifications subject to change without notice.

No license is granted by implication or otherwise under any patent or patent rights of Analog

Devices.Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

©2018–2020 Analog Devices, Inc. All rights reserved.

Technical Support

www.analog.com

FEATURES

Ultrawideband frequency range: 100 MHz to 44 GHz

Reflective design

Low insertion loss with impedance match

1.0 dB typical to 18 GHz

1.4 dB typical to 40 GHz

1.7 dB typical to 44 GHz

Low insertion loss without impedance match

0.9 dB typical to 18 GHz

1.7 dB typical to 40 GHz

2.1 dB typical to 44 GHz

High input linearity

P1dB: 27.5 dBm typical

IP3: 50 dBm typical

High RF input power handling

Through path: 27 dBm

Hot switching: 27 dBm

No low frequency spurious

12-terminal, 2.25 mm × 2.25 mm LGA package

Pin compatible with the ADRF5025 low frequency cutoff

version

APPLICATIONS

Industrial scanners

Test and instrumentation

Cellular infrastructure: 5G mmWave

Military radios, radars, electronic counter measures (ECMs)

Microwave radios and very small aperture terminals (VSATs)

FUNCTIONAL BLOCK DIAGRAM

ADRF5024

VSS

CTRL

VDD

RFC

Figure 1.

GENERAL DESCRIPTION

The ADRF5024 is a reflective, single-pole double-throw

(SPDT) switch manufactured in the silicon process.

This switch operates from 100 MHz to 44 GHz with better than

1.7 dB of insertion loss and 35 dB of isolation. The ADRF5024

has a radio frequency (RF) input power handling capability of

27 dBm for both the through path and hot switching.

The ADRF5024 draws a low current of 14 μA on the positive

supply of +3.3 V and 120 μA on negative supply of −3.3 V. The

device employs complementary metal-oxide semiconductor

(CMOS)-/low voltage transistor to transistor logic (LVTTL)-

compatible controls.

The ADRF5024 is pin-compatible with the ADRF5025, low

frequency cutoff version, which operates from 9 kHz to 44 GHz.

The ADRF5024 RF ports are designed to match a characteristic

impedance of 50 Ω. For ultrawideband products, impedance

matching on the RF transmission lines can further optimize

high frequency insertion loss and return loss characteristics.

Refer to the Electrical Specifications section, Typical Performance

Characteristics section, and Applications Information section

for more details.

The ADRF5024 comes in a 2.25 mm × 2.25 mm, 12-terminal,

RoHS-compliant, land grid array (LGA) package and can

operate between −40°C to +105°C.