Data Sheet

ADRF5515A

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 15

Table 2.

Parameter

Rating

Positive Supply Voltage

VDD1-CHA, VDD1-CHB, VDD2-CHA,

VDD2-CHB

7 V

SWVDD-CHAB

5.4 V

Digital Control Input Voltage

SWCTRL-CHAB

BP-CHA, BP-CHB, PD-CHAB

Digital Control Input Current

SWCTRL-CHAB, BP-CHA, BP-CHB, PD-

CHAB

20 mA

RF Input Power

Transmit Input Power (LTE Peak, 9 dB PAR) 53 dBm

Receive Input Power (LTE Peak, 9 dB PAR) 25 dBm

Temperature

Storage

−65°C to +150°C

Reflow (Moisture Sensitivity Level 3 (MSL3)

Rating)

260°C

CHB pins.

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operation environment. Careful attention to PCB

thermal design is required.

thermal resistance.

Table 3. Thermal Resistance

Package Type

Unit

CP-40-15

High Gain Mode, Receive Operation

25

°C/W

Low Gain Mode, Receive Operation

36

°C/W

Power-Down Mode, Transmit Operation

6

°C/W

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

Charged device model (CDM) per ANSI/ESDA/JEDEC JS-002.

Table 4. ADRF5515A, 40-Lead LFCSP

ESD Model

Withstand Threshold (V)

Class

HBM

1000

1C

CDM

750

C2

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.