9727 datasheet(10/26 Pages) 3M

部件名	9727

功能描述	Scotch-Weld™ Hot Melt Applicator PG II LT Owner’s Manual

PDF	26 Pages

Scroll/Zoom	100%

制造商	3M [3M Electronics]

网页	http://www.3m.com

标志

10 / 26 page

Preventive Maintenance

During Operation

Always use the bench stand provided when 3M™

Scotch-Weld™ Hot Melt Applicator PG II LT is not

in use. Do not lay the applicator on its side. This

impedes cooling process and may cause plugging

problems.

Open adhesive cartridge stick only when necessary.

Keep sticks clean and free from airborne

contaminants.

After Operation

Before shutting down the 3M Scotch-Weld Hot Melt

Applicator PG II LT, put the electrical switch in the

“off” position. Continue using the applicator until

approximately one adhesive stick has been

discharged.

Note

If proper shutdown procedure has not been

followed, up to one hour heat up prior to use may

be required.

Lubricate inside loading chamber with 3M™ Silicone

Lubricant or equivalent once a week.

otc

h-W

eld

™

t M

elt

pli

tor

9727 数据表(PDF) 10 Page - 3M Electronics